Pump Parts and Accessories
Perkin Elmer US LLC Magazine for Liquid Sample Sealer
The Liquid Sample Sealer is used to seal volatile, non-viscous, non-corrosive samples in either the 4 µL aluminum capsules (02400642) or 30 µL aluminum capsules (00090709).
AVANTOR MASTERFLEX (VWR LLC) Rubberfab TR-EXT-.25-SET Torque Tee Sanitary Clamp Securing Device Drive Extension Set, 1/4"", 3 pieces
Use the Torque Tee to install and remove sanitary clamps safely and securely, even in hard-to-reach spaces. The shape of the handle provides plenty of leverage to reach the factory preset torque. Just listen for the audible click to know the clamp wing nut is properly tightened. If you need to loosen or remove the clamp, simply disengage the ratcheting mechanism to lock the handle.
ATLANTIC BIOPHARM SOLUTIONS LLC DELIVERY HOSE W/CAST TRICLAMP
Delivery hose with cast TriClamp AIRDUC PUR 350 FOOD-ASØ-Inner 1.25"/ 32mm L=4300mm
AVANTOR MASTERFLEX (VWR LLC) Kobold PSR-5115 Flow Switch, Brass 1.3-2.1/1.0-2.0 GPM Increase/Decrease
The device operates as follows: The flowing medium presses against the paddle for the flow switch. The paddle is fitted to one end of a balance arm which is in direct contact with a prestressed leaf spring. At the other end of the balance arm is a permanent magnet. This magnet actuates a reed contact located within a moveable housing outside the media. The reed contact switches on or off depending on the position of the permanent magnet and the switch housing. The status of the switch may then be used to electrically control the fluid flow. The moveable reed switch on the unit allows the contacts to be set either normally open (N/O) or normally closed (N/C). FEATURES
- Switch point adjustable
- Easy to install
- Brass or SS construction
- Maximum pressure: 1450/3600 PSI